BackBack

HERELINK AIR UNIT

€0.00

SKU: HX4-06071Categories: PixHawk, autopilot and OSD
Description

HERELINK AIR UNIT SPECIFICATION

Appearance & Interface:

  • Main board + video daughterboard + RF daughterboard
  • Video daughterboard designed for bridging HDM I signal input
  • RF daughterboard designed for transceiver transmission RF signal
  • Use M2 (E) connector to connect daughterboard and main board

Dimensions                                             76.7 x 27 mm

2 x Micro HDMI                                       for externall camera video signal input (foreside)

1 x 2 pin connector interface (side)   include one 5V - 12V Power Input Interface

1 x 3 pin connector interface (side)   include one 3.3V / 5V Level UART interface

1 x 4 pin connector interface (side)   include two 3.3V level RC output interfaces (SBus / IBus output, optional control)

1 x Micro USB interface (side)             Debug & upgrade support OTG

1 x Key (side)                                           One button pairing connection-setup between  air system and ground system

                                                                  Auto channel selection for better performance - Fast connection recovery in milliseconds

2 x indicator light (side)                     indicate status of pairing connection and transmission

2 x MMCX antenna interface              for transmission between ground system and air system

 

Functions and Features:

Processor                            SoC - pinecone S1 AP: 4 x big cores, Cortex A53@2.2GHz

                                              4 x small cores, Cortex A53@1.4GHz  -  GPU: 4 cores, Mali- T860 - SDR: A7 + DSP

Storage                                LPDDR3: 1GB                       -        eMMC: 4GB

Bandwidth                          20MHz/ 10MHz

Latency                                FCC 20km CE / SRRC 12km

Video Resolution               minimum 110ms (from input source to ground control screen display)

Operating Frequency        2.4GHz ISM

Receiver Sensitivity          -99dBm@20MHz BW

Interference Recovery       < 1s

Power Consumption          average below 4 W

 

HERELINK CONTROLLER SPECIFICATION

Appearance & Functions:

Dimensions                 217x106.5x31 mm (not included antennas and analog sticks)

Material                        plastic

Video                             5.46 inches , 1080P , 16 million colors , LCD touchscreen

Audio                            build-in Speakerx        -          1 build-in micx2

Remote Control          rockerx2 - wheel x 1- bottom keyx6 , with back light - top keyx 1 ( right )

Modem                         BT/ WiFi / GPS  -  2.4G transmission ground system

Indicate Light             top tri-color lightx2 ( left, right )

Interface                      MicroUSBx 1 - TFlashx1 (Supports maximum expansion capability up to 64GB)

Antennae                     directional antenna (4.5dBi)xl, sectional - omni Antenna (2dBi)x 1, sectional

                                      built-in WiFi antenna - built-in GPS antenna - External GPS antenna interface

Battery                         built-in 4950 mAh lipo battery

Charger                        support Micro USB 2A charge

 

Features:

Processor                       SoC - pinecone 51

                                         AP: 4 x big cores, Cortex A53@2.2GHz 4 x small cores, Cortex A53@1.4GHz

                                         GPU: 4 cores, Mali-T860     -      SDR: A7 + DSP

Storage                           LPDDR3: 2GB                        -       eMMC: 4GB

Transmission                FCC 20km CE / SRRC 12km

Latency                           minimum 110ms (from input source to ground control screen display)

Video Resolution           720p@30fps          -          1080p@30/60fps

Operating Frequency    2.4GHz ISM

Receiver Sensitivity     -99dBm@20MHz BW

Interference Recovery   < 1s

Power Consumption    average below 4W "Only when Transmission system working, medium brightness, WiFi closed, GPS closed