BackBack

Mauch 005: PL-250 Sensor board / 2x 15cm 8AWG / With CFK Enclosure

€61.00

Hurry, there are only 5 item(s) left!
SKU: MH005Categories: PixHawk, autopilot and OSD
Description

250A - Current / Voltage measurement sensor board, based on Allegro Hall Sensor ACS770-250U.

Voltage range is up to 14S (60V) with solder bridge open and up to 7S (30V) with solder bridge closed. Please check the maual page for more details.

This Sensor board connects directly to any Premium-Line BEC or Sensor Hub X2-V2.

Connected to the sensor are 2x15cm AWG8 wire (red) as a standard.

REM: The connector is Molex / Clik-Mate / 1.25mm / 4p (5023800400)

Without CFK enclosure = 27.5 x 19.5 x 10.5mm / 39g (with 2x 15cm 8AWG)

With CFK enclosure = 43.5 x 23.0 x 15mm / 44g (with 2x 15cm 8AWG)

Delivery in PP box: 88 x 60 x 20mm / 59g

Delivery without sensor cable (comes with the BEC's), with ABS/CFK enclosure