BackBack
-8%

The Cube Green - for 3DR Solo

€185.00 €169.00

SKU: HX4-06012Categories: PixHawk, autopilot and OSD
Description


INSIDE THE CUBE

An STM32F427 Rev 3 Flight management unit. (where the flight controller lives.)
An STM32F100 I/O processor with pass through capabilities for failsafe. (deals with the Receiver and outputs )

3 IMU's

Fixed 10 Axis IMU on the main Main board
MPU9250 3 axis accel, 3 axis gyro, 3 axis mag, MS5611 barometer
2 vibration isolated and heat controlled 9DOF IMU's and an isolated barometer. MPU9250 3 axis accel, 3 axis gyro, 3 axis mag
LSM303D 3 axis accel, 3 axis mag, L3GD20 3 axis gyro, MS5611 barometer

In case you missed it.... 3 IMU's STANDARD.

All connections are via an 80 pin DF17 connector on the base; the following connections are included:
2x CAN (pins reserved for a 3rd Can bus on next years model)
2x I2C
5x Serial (1 reserved for debug)
2x SWD debug ports
2x Power sense input, V+I
1x Analogue input (one of the power inputs can be used as Analogue if you need)
Buzzer raw pwm
Safety switch
8 x I/O connected PWM out (Solder option for 3.3 or 5v levels, default 3.3)(opto drive capable 10mA each)
6 x Aux FMU connected I/O (PWM or alternate function)
Servo rail I/O backup power (10.5v Max)
2x 5.4v power in pins.

In the box

  • 1x The Cube Green

 

Ships in 4 to 7 working days from order placement